Seleccione su país

Visite el sitio web global

  1. es
  2. Productos
  3. Sensores industriales
  4. Medición de nivel
  5. Conmutadores flotantes
  6. LFL2-**-U

LFL2-**-U Float Switch

Ventajas clave de un vistazo

  • Switch element: microswitch, mercury-free
  • Limit value detection for fluids
  • Sleeve design: small diameter, mounting through G1 tap hole possible
  • Ball design: high buoyancy
Comuníquese con nosotros para obtener una estimación exacta de la entrega.
Product photo: Float Switch LFL2-**-U
Product photo: Float Switch LFL2-**-U
Product Compliance: Europe – CE
Approval
Nota

Todos los documentos relacionados con los productos, como certificados, declaraciones de conformidad, etc., que se emitieron antes de la conversión con el nombre de Pepperl+Fuchs GmbH o Pepperl+Fuchs AG también se aplican a Pepperl+Fuchs SE.

ES
  • ES
  • EN
  • DE
  • FR
Hoja de datosFunciónClasificaciónProduct DocumentationDesign / SimulationHomologaciones

Datos técnicos de LFL2-**-U

Construction typemicroswitch with switching ball, change-over contact
SeriesLFL2-**-U
Contact loading250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load
Rated insulation voltage300 V
Pulse withstand voltage4 kV
Electrical life≥ 5 x 104 switching cycles
Connectionvolt-free change-over contact
Low voltage
Directive 2014/35/EUEN 60947-5-1:2017
Degree of protectionIEC 60529:2001
Equipment architectureThis device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements.
Installation conditions
Installation instructionsrange of application and minimum length between mounting and float:
- PVC version: ≥ 50 mm (2 inch), preferred for water
- PUR version: ≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluids
- CSM/CM version: ≥ 100 mm (4 inch), preferred for many acids and lyes
- TPK version: ≥ 100 mm (4 inch), preferred for many acids and lyes

mounting:
- The float switch is mounted either from sidewards through a cable gland ≥ G1A into the vessel or
- by means of a counter weight or rods (e. g. float switch combination) from the top.
The pivot of the cable should always be horizontal.
Process conditions
Process pressure (static pressure)sleeve design: ≤ 3 bar at 20 °C (68 °F)
ball design: ≤ 2 bar at 20 °C (68 °F)
Densitysleeve design: ≥ 0.8 g/cm3
ball design: ≥ 0.6 g/cm3
Ambient temperaturePVC version: 5 ... 70 °C (41 ... 158 °F)
PUR version: 5 ... 70 °C (41 ... 158 °F)
CSM/CM version: -20 ... 70 °C (-4 ... 158 °F)
TPK version: 5 ... 70 °C (41 ... 158 °F)
Storage temperature-25 ... 70 °C (-13 ... 158 °F)
Altitude≤ 2000 m above MSL
Degree of protectionIP68
Materialfloat: PP (Polypropylene)
cable:
- PVC version: PVC cable, highly flexible (3 x 0.75 mm2)
- PUR version: PUR cable, highly flexible (3 x 0.50 mm2)
- CSM/CM version: CSM/CM cable (chlorinated polyethylene, (3 x 0.75 mm2))
- TPK version: TPK cable, (3 x 0.75 mm2)
Switching pointswitch angle, measured against the horizontal:
- upper switch point +25° ±10°
- lower switch point -14° ±10°
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Designation- LFL-Z231, counter nut, G1A, PVC
- LFL-Z32, counter weight, grey cast iron with plastic coating (Polycarbonate)
- LFL-Z33, counter weight, grey cast iron with ECTFE coating (Halar)
- LFL-Z131, gland screw connection G1A, PVC
- LFL-Z132, gland screw connection G1A, brass
- LFL-Z161, gland screw connection G2A, PVC
- LFL-Z431, gland screw connection 1 NPT, PVC
- LFL-Z461, gland screw connection 2 NPT, PVC
Notas generales