VBA-3E3A-G20-ZEL/E2L-P1 ASi I/O Module

Ventajas clave de un vistazo

A/B node with extended addressing possibility for up to 62 nodes
Inputs for 3-wire sensors
Power supply of the inputs and outputs from the external auxiliary voltage
Connection of actuators and sensors via cable outputs with M8 connectors
Communication monitoring
Function display for bus, external auxiliary voltage, in- and outputs
Cable piercing method with gold plated contact pins

Product photo: ASi I/O Module VBA-3E3A-G20-ZEL/E2L-P1

Dimensions: ASi I/O Module VBA-3E3A-G20-ZEL/E2L-P1

Nota

Todos los documentos relacionados con los productos, como certificados, declaraciones de conformidad, etc., que se emitieron antes de la conversión con el nombre de Pepperl+Fuchs GmbH o Pepperl+Fuchs AG también se aplican a Pepperl+Fuchs SE.

Hoja de datos Función Clasificación Informative Literature Product Documentation Design / Simulation Homologaciones Software Productos relacionados

Datos técnicos de VBA-3E3A-G20-ZEL/E2L-P1

G20 module with AS-Interface for digital inputs/outputs, 3 inputs and 3 outputs

Node type

A/B node

AS-Interface specification

V3.0

Required gateway specification

≥ V2.1

Profile

S-7.A.E

IO code		7
ID code		A
ID1 code		7
ID2 code		E

UL File Number

E223772 "For use in NFPA 79 Applications only"

MTBF

110 a

LED FAULT		error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage U_AUX missing
LED PWR		AS-Interface voltage; green LED green: voltage OK flashing green: address 0 or overload of sensor power supply or overload of outputs or external auxiliary voltage U_AUX missing
LED AUX		ext. auxiliary voltage U_AUX; dual LED green/red green: voltage OK red: reverse voltage
LED IN		switching state (input); 3 LED yellow
LED OUT		Switching state (output); 3 LED yellow

Auxiliary voltage (output)	U_AUX	20 ... 30 V DC PELV
Rated operating voltage	U_e	26.5 ... 31.6 V from AS-Interface
Rated operating current	I_e	≤ 35 mA

Number/Type		3 Inputs for 3-wire sensors (PNP), DC
Supply		from external auxiliary voltage U_AUX
Current loading capacity		500 mA , overload and short-circuit protected
Input current		≤ 8 mA (limited internally)
Switching point		according to DIN EN 61131-2 0 (undamped) ≤ 0.5 mA 1 (damped) ≥ 2.0 mA
Signal delay		< 1 ms (input/AS-Interface)

Number/Type		3 electronic outputs, PNP, overload and short-circuit proof
Supply		from external auxiliary voltage U_AUX
Voltage		≥ (U_AUX - 0.5 V)
Current		2 A per output TB ≤ 40 °C: 6 A total TB ≤ 60 °C: OUT1+OUT2 max. 3 A, OUT3 max. 2 A

Electromagnetic compatibility

Directive 2014/30/EU

EN 62026-2:2013

Degree of protection		EN 60529:2000
Fieldbus standard		EN 62026-2:2013
Input		EN 61131-2:2007
Emitted interference		EN 61000-6-4:2007
AS-Interface		EN 62026-2:2013
Noise immunity		EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013

Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)

Degree of protection

IP54 according to EN 60529

Connection

AS-Interface, AUX: Insulation piercing technology
Yellow flat cable/black flat cable
Inputs/outputs: M8 round plug connector in accordance with EN 61076-2-104
Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded)
Matching connector: LM004-Gx1-A or similar
Outputs: NF003-SS1-A (3-pin, bushing contacts, snap lock, A-coded)
Matching connector: NM003-Sx1-A or similar

Mass

260 g

Dimensions