ICA-8DIO-CB10-IO IO-Link printed circuit board module

Ventajas clave de un vistazo

Outputs short-circuit and overload proof
Connection via lead
IO-Link interface
Ultra-compact enclosure
8 digital inputs/outputs can be configured

Product photo: IO-Link printed circuit board module ICA-8DIO-CB10-IO

Dimensions: IO-Link printed circuit board module ICA-8DIO-CB10-IO

Nota

Todos los documentos relacionados con los productos, como certificados, declaraciones de conformidad, etc., que se emitieron antes de la conversión con el nombre de Pepperl+Fuchs GmbH o Pepperl+Fuchs AG también se aplican a Pepperl+Fuchs SE.

DE

DE
EN
FR

Hoja de datos Función Clasificación Product Documentation Design / Simulation Homologaciones Software Productos relacionados

Datos técnicos de ICA-8DIO-CB10-IO

I/O hub with IO-Link interface

LED PWR		LED green: flashing with short break (1 Hz) - IO-Link mode
LED OL		overload of sensor power supply; LED red
LED IO		Switching status/overload (input/output); 8 LED yellow/red yellow: input/output active red: output overload

Operating voltage	U_B	18 ... 30 V DC, PELV
No-load supply current	I₀	max. 25 mA
Operating current	I_B	max. 2 A
Protection class		III

Interface type		IO-Link
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D
Process data		Inputs 2 Byte - Input signals 8 Bit - diagnosis signals 4 Bit Outputs 2 Byte - Output signals 8 Bit - Special functions 8 Bit
Vendor ID		1 (0x0001)
Device ID		984577 (0x0F0601)
Data transfer rate		COM3 (230.4 kbits/s)
Min. cycle time		1 ms
SIO mode support		no
Compatible master port type		Class A , Class B

Number/Type		8 Inputs for 3-wire sensors (PNP), DC (IO1 ... IO8)
Supply		from IO-Link
Voltage		18 ... 30 V
Current loading capacity		400 mA , overload and short-circuit protected
Input current		≤ 5 mA (limited internally)
Switching point		Type 1 according to IEC 61131-2

Number/Type		8 electronic outputs, PNP (IO1 … IO8), overload proof and short-circuit proof
Supply		from IO-Link
Voltage		≥ (U_B - 1.5 V)
Current		200 mA per output

Electromagnetic compatibility

Directive 2014/30/EU

EN 61326-1:2013
EN 55011:2016

Degree of protection		EN 60529:2000
Fieldbus standard		EN 61131-9:2013
Input		EN 61131-2:2007
Communication interface		IEC 61131-9 / IO-Link V1.1.3
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005, EN 61326-1:2006

UL approval

Protection class IP20 is not included in the UL approval. The protection class is tested by Pepperl+Fuchs.

Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		85 % non-condensing
Climatic conditions		For indoor use only
Altitude		≤ 5000 m above MSL
Shock and impact resistance		30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks
Vibration resistance		0.35 mm / 5 g 5 ... 500 Hz
Pollution degree		2

Degree of protection

IP20 according to EN 60529

Connection

200 mm, PVC cable 0.5 mm²

Material

Housing

Polyamide hot-melt adhesive

Mass

33 g

Dimensions

Height		10 mm
Width		36 mm
Length		39.5 mm

Note

This device is maintenance-free. If the device is used in a manner not specified by the manufaturer, the protection provided by the device may be impaired.

Notas generales

Noticias y aplicaciones relacionadas

Obtenga más información sobre noticias y aplicaciones relacionadas con este producto.

Infraestructura de IO-Link

Pepperl+Fuchs ofrece una gama de infraestructuras de IO-Link optimizadas para cada aplicación.