NBB8-F148P10-E2-M-0,15M-3DT04 Inductive sensor

Key Benefits at a Glance

8 mm flush
3-wire DC
Extended temperature range
E1-Type approval
Highly shock and vibration resistant

Product photo: Inductive sensor NBB8-F148P10-E2-M-0,15M-3DT04

Dimensions: Inductive sensor NBB8-F148P10-E2-M-0,15M-3DT04

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Design / Simulation Approvals

Technical data of NBB8-F148P10-E2-M-0,15M-3DT04

Switching function		Normally open (NO)
Output type		PNP
Rated operating distance	s_n	8 mm
Installation		flush
Output polarity		DC
Assured operating distance	s_a	0 ... 6.48 mm
Reduction factor r_Al		0.45
Reduction factor r_Cu		0.4
Reduction factor r₃₀₄		0.8
Reduction factor r_Brass		0.5
Output type		3-wire

Operating voltage	U_B	10 ... 60 V DC
Switching frequency	f	0 ... 600 Hz
Hysteresis	H	2 ... 20 % ( typ. 3 % )
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop	U_d	≤ 1.5 V
Operating current	I_L	0 ... 200 mA
Off-state current	I_r	≤ 10 µA
No-load supply current	I₀	≤ 10 mA
Time delay before availability	t_v	≤ 300 ms
Switching state indicator		LED, yellow

MTTF_d		1008 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Standard conformity

Standards

EN IEC 60947-5-2

E1 Type approval

10R-04

Ambient temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)

Connection type

PUR cable with Deutsch connector L = 150 mm

Connection assembly

Deutsch housing DT 04-3P-P004
Deutsch wedge W3P
Deutsch contact 1060-16-0622

Core cross section

3 x 0.75 mm²

Housing material

anodized aluminum

Sensing face

PBT

Degree of protection

IP67 / IP69K

Tightening torque, housing screws

≤ 1.8 Nm

Dimensions

Height		20 mm
Width		35 mm
Length		50 mm

General Notes