Seleccione su país
VBA-1E1A-G10-ZAL/E2L-1M-2V3-G AS-Interface sensor/actuator module
Ventajas clave de un vistazo
- Ultra-compact enclosure
- Gold-plated and machined contacts
- One piece housing
- Degree of protection IP68 / IP69K
- Direct connection via cable outlet
Mostrar más




Nota
Todos los documentos relacionados con los productos, como certificados, declaraciones de conformidad, etc., que se emitieron antes de la conversión con el nombre de Pepperl+Fuchs GmbH o Pepperl+Fuchs AG también se aplican a Pepperl+Fuchs SE.
EN
- EN
- DE
- FR
Datos técnicos de VBA-1E1A-G10-ZAL/E2L-1M-2V3-G
G10 ultra-compact module, 1 input and 1 output |
Node type | A/B node | |
AS-Interface specification | V3.0 | |
Required gateway specification | ≥ V2.1 | |
UL File Number | E223772 "For use in NFPA 79 Applications only" |
LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing | |
LED AS-i | AS-Interface voltage; LED green | |
LED IN | switching state (input); LED yellow | |
LED OUT | Switching state (output); LED yellow |
Auxiliary voltage | UAUX | 20 ... 30 V DC PELV |
Rated operating voltage | Ue | 18.5 ... 31.6 V from AS-Interface |
Rated operating current | Ie | ≤ 40 mA |
Protection class | III | |
Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
Number/Type | 1 input for 2- or 3- wire sensors (PNP), DC | |||||||
Supply | from external auxiliary voltage UAUX | |||||||
Voltage | 20 ... 30 V | |||||||
Current loading capacity | ≤ 1000 mA overload and short-circuit resistant | |||||||
Input current | ≤ 9 mA (limited internally) | |||||||
Switching point | according to DIN EN 61131-2 (Type 2) | |||||||
| ||||||||
Signal delay | < 1 ms (input/AS-Interface) |
Number/Type | 1 electronic output, PNP, | |
Supply | from external auxiliary voltage UAUX | |
Voltage | ≥ (UAUX - 0.5 V) | |
Current loading capacity | ≤ 1000 mA overload and short-circuit resistant |
Electromagnetic compatibility | |||||
|
Degree of protection | EN 60529:2000 | |
Fieldbus standard | EN 62026-2:2013 | |
Input | EN 61131-2:2007 | |
Emitted interference | EN 61000-6-4:2007 | |
AS-Interface | EN 62026-2:2013 | |
Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
Profile | S-7.A.E | |||||||||||||
IO code | 7 | |||||||||||||
ID code | A | |||||||||||||
ID1 code | 7 | |||||||||||||
ID2 code | E | |||||||||||||
Data bits (function via AS-Interface) | InputOutput | |||||||||||||
| ||||||||||||||
Parameter bits (programmable via AS-i) | function | |||||||||||||
|
UL approval | cULus Listed, Type 1 enclosure | ||||
|
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks | |
Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
Degree of protection | IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* | ||||||||||||||||
Connection | AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M8 round plug connector in accordance with EN 61076-2-104 Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM004-Gx1-A or similar Outputs: NF003-SS1-A (3-pin, bushing contacts, snap lock, A-coded) Matching connector: NM003-Sx1-A or similar | ||||||||||||||||
Material | |||||||||||||||||
| |||||||||||||||||
Cable | |||||||||||||||||
| |||||||||||||||||
Mass | 100 g | ||||||||||||||||
Tightening torque, fastening screws | 1.65 Nm | ||||||||||||||||
Tightening torque, cable gland | 0.4 Nm | ||||||||||||||||
Dimensions | |||||||||||||||||
|