VBA-4E3A-G20-ZEL/E2L-P5 ASi I/O Module

Ventajas clave de un vistazo

A/B node with extended addressing possibility for up to 62 nodes
Inputs for 3-wire sensors
Power supply of the inputs and outputs from the external auxiliary voltage
Communication monitoring
Function display for bus, external auxiliary voltage, in- and outputs
Cable piercing method with gold plated contact pins
M12 connection, e.g., suitable for Lenze Smart Motor drives and SEW MOVI-SWITCH

Product photo: ASi I/O Module VBA-4E3A-G20-ZEL/E2L-P5

Dimensions: ASi I/O Module VBA-4E3A-G20-ZEL/E2L-P5

Nota

Todos los documentos relacionados con los productos, como certificados, declaraciones de conformidad, etc., que se emitieron antes de la conversión con el nombre de Pepperl+Fuchs GmbH o Pepperl+Fuchs AG también se aplican a Pepperl+Fuchs SE.

Hoja de datos Función Clasificación Informative Literature Product Documentation Homologaciones Software Productos relacionados

Datos técnicos de VBA-4E3A-G20-ZEL/E2L-P5

G20 module with AS-Interface for digital inputs/outputs, 4 inputs and 3 outputs

Node type

A/B node

AS-Interface specification

V3.0

Required gateway specification

≥ V2.1

Profile

S-7.A.E

IO code		7
ID code		A
ID1 code		7
ID2 code		E

UL File Number

E223772 "For use in NFPA 79 Applications only"

MTBF

110 a

LED FAULT		error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage U_AUX missing
LED PWR		AS-Interface voltage; green LED green: voltage OK flashing green: address 0 or overload of sensor power supply or overload of outputs or external auxiliary voltage U_AUX missing
LED AUX		ext. auxiliary voltage U_AUX; dual LED green/red green: voltage OK red: reverse voltage
LED IN		switching state (input); 4 LED yellow
LED OUT		Switching state (output); 3 LED yellow

Auxiliary voltage (output)	U_AUX	20 ... 30 V DC PELV
Rated operating voltage	U_e	26.5 ... 31.6 V from AS-Interface
Rated operating current	I_e	≤ 35 mA

Number/Type		4 Inputs for 3-wire sensors (PNP), DC
Supply		from external auxiliary voltage U_AUX
Current loading capacity		500 mA , overload and short-circuit protected
Input current		≤ 8 mA (limited internally)
Switching point		according to DIN EN 61131-2 0 (undamped) ≤ 0.5 mA 1 (damped) ≥ 2.0 mA
Signal delay		< 1 ms (input/AS-Interface)

Number/Type		3 electronic outputs, PNP, overload and short-circuit proof
Supply		from external auxiliary voltage U_AUX
Voltage		≥ (U_AUX - 0.5 V)
Current		2 A per output TB ≤ 40 °C: 6 A total TB ≤ 60 °C: OUT1+OUT2 max. 3 A, OUT3 max. 2 A

Electromagnetic compatibility

Directive 2014/30/EU

EN 62026-2:2013

Degree of protection		EN 60529:2000
Fieldbus standard		EN 62026-2:2013
Input		EN 61131-2:2007
Emitted interference		EN 61000-6-4:2007
AS-Interface		EN 62026-2:2013
Noise immunity		EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013

Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)

Degree of protection

IP54 according to EN 60529

Connection

AS-Interface, AUX: Insulation piercing technology
Yellow flat cable/black flat cable
Inputs/outputs: M12 round plug connector in accordance with EN 61076-2-101
Inputs: LF type (4-pin, bushing contacts, screw lock, A-coded)
Matching connector: LM type or similar
Outputs: LF type (4-pin, bushing contacts, screw lock, A-coded)
Matching connector: LM type or similar

Mass

260 g

Dimensions